Delivery
Confirmed when the order is placedThe delivery time is confirmed to you when your order is approved. This product is heavy and bulky, so it is shipped by freight; freight costs within Türkiye are covered by us.
New Product
Amalgam UV Water Treatment Unit 50 m³/Hour – 2 Lamps
₺173,280.04
VAT included · Free freight delivery
This product is heavy and bulky, so it is shipped by freight; freight costs within Türkiye are covered by us.
Ordering from outside Türkiye
Online payment is only available for delivery addresses in Türkiye. For orders from abroad, we prepare a price quote.
- Shipping, customs duties and any taxes are paid by the buyer.
- Payment is made by bank transfer after a proforma invoice.
- Delivery time and shipping method are agreed together in the quote.
Your location:
Free Freight Delivery
Across Türkiye
Lead Time
Confirmed when the order is placed
2-Year Warranty
Misuse is not covered.
Order by Phone
0850 304 95 25
- SKU
- WP-UV-010
- Category
- UV Water Treatment, Industrial Water Treatment
2 Amalgam Lamps · 660 Watt · Digital Panel
Two-Lamp Treatment at High Flow with the Amalgam UV Water Treatment Unit
The Amalgam UV Water Treatment Unit is an industrial ultraviolet unit in which two amalgam lamps run inside a 304 grade stainless steel body, with 3 inch flanged connections and a digital panel. With a total power of 660 watts, it treats water with ultraviolet light on lines up to 50 m³ per hour at a 300 J/m² dose, or up to 38 m³ per hour at the higher 400 J/m² dose; by disrupting the structure of microorganisms in the water, it helps reduce the microbiological load.
- Flow Rate · 300 J/m²
- 50 m³/hour
- Lamps
- 2 Amalgam
- Total Power
- 660 Watt
01Problem & Solution
At High Flow the Lamp Count Climbs Fast
Problem
More Lamps, More Maintenance Points
On lines carrying tens of cubic metres of water an hour, the output per unit length of standard low-pressure UV lamps is limited, so many lamps have to be fitted in the body to reach the required dose. Every lamp means another quartz sleeve and another connection point; lamp changes, sleeve cleaning and fault tracking all add to the workload.
Solution
Two Amalgam Lamps Are Enough
The Amalgam UV Water Treatment Unit uses amalgam lamps, which give a higher ultraviolet output per unit length. Where a UV unit with standard lamps in the same 50 m³/hour flow class runs on ten lamps, this unit makes do with two; the number of lamps, sleeves and maintenance points falls markedly.
02Key Features
Fewer Lamps, High Flow
The Amalgam UV Water Treatment Unit brings together in a single body the UV output, connections and monitoring that high-flow industrial lines need.
Amalgam Lamp Technology
The mercury in the lamp is present as an alloy with a metal such as indium. This low-pressure high-output class of lamp gives a higher ultraviolet output per unit length than a standard lamp.
50 m³/hour Flow
It handles 50 m³ of water an hour at a 300 J/m² dose and 38 m³ an hour at the higher 400 J/m² dose; it suits factory and plant main lines.
3 Inch Flanged Connection
The inlet and outlet are 3 inch flanged; the unit is fitted to high-flow industrial pipework with a bolted joint to a mating flange.
Digital Panel
The panel includes a fault indicator, an electronic operating-hours counter and an audible fault alarm. It also gives a warning when lamp life is up.
304 Stainless Steel Body
The body is 304 grade stainless steel; an AISI 316 body option is also available on request. The unit’s working pressure is 6–8 bar.
Chemical-Free Treatment
It works with ultraviolet light and adds no chemicals to the water; after treatment it leaves no chemical residue in the water.
03Technical Specifications
System Details
| Feature | Value | What it does |
|---|---|---|
| Product Type | Industrial UV with Amalgam Lamps | The product family it belongs to. When buying a spare, the family alone is not enough; the size and model must match too. |
| Flow Rate (300 J/m²) | 50 m³/hour | |
| Flow Rate (400 J/m²) | 38 m³/hour | |
| Number of Lamps | 2 Amalgam Lamps | |
| Nominal Power | 660 Watt | |
| Connection Diameter | 3" · Flanged | The pipe connection size. It has to match the diameter in your plumbing. |
| Housing Material | AISI 304 Stainless Steel | The outer body material. Stainless steel means high pressure and a long life. |
| Body Option | AISI 316 (Optional) | |
| Working Pressure | 6 – 8 Bar | |
| Supply Voltage | 220 V · 50 Hz | |
| Lamp Service Life | 9,000 Hours | |
| Control Panel | Digital | |
| Alarm System | Fault Indicator · Audible Alarm | |
| Operating Hours | Electronic Counter | |
| Body Orientation | Horizontal · Mounted on Legs |
04Applications
Where Is It Used?
The Amalgam UV Water Treatment Unit is used as the final stage, after the filtration stages, on industrial lines carrying 38–50 m³ of water an hour.
Factories & Production PlantsFood & Beverage PlantsHotels & Holiday ResortsEstate & Housing Development Main LinesHigh-Flow Well WaterTank & Reservoir OutletsTreatment Plant OutletsProcess Water Lines
05How It Works
How Does the Amalgam UV Water Treatment Unit Work?
The Amalgam UV Water Treatment Unit produces ultraviolet light at a wavelength of 254 nanometres using amalgam lamps, which belong to the low-pressure high-output lamp class. The characteristics of the lamp types and the concept of ultraviolet dose are explained in detail in the US Environmental Protection Agency’s (EPA) ultraviolet guidance manual.
-
The Water Is Clarified First
Sediment, turbidity, iron and manganese are held back in pre-treatment stages such as a sand filter and cartridge filters. Clear water lets the UV pass through it more easily.
-
It Enters the Body Through the Flanged Inlet
Water enters the horizontal stainless steel body through the 3 inch flanged inlet and flows around the two amalgam lamps in their quartz sleeves.
-
The Amalgam Lamps Produce UV Light
The amalgam in the lamp limits the amount of mercury that passes into the vapour phase. The lamps typically run at an operating temperature of 60–100 °C and give a high ultraviolet output per unit length.
-
The UV Meets the Water
The ultraviolet light disrupts the structure of microorganisms in the water and helps reduce the microbiological load. The water then goes out to the pipework through the 3 inch flanged outlet.
-
It Is Monitored from the Digital Panel
The panel counts operating hours electronically; in the event of a fault it alerts you with the fault indicator and an audible alarm, and it also gives a warning when lamp life is up.
06Making the Right Choice
Is 50 m³/Hour Right for Your Line?
When choosing the Amalgam UV Water Treatment Unit, consider line flow rate, target dose, water clarity and installation conditions together.
Line Flow Rate and Dose
Work to 50 m³/hour for a 300 J/m² target and 38 m³/hour for a 400 J/m² target; the line’s highest instantaneous flow rate should not exceed this value.
Water Clarity
Turbidity, iron, manganese and hardness reduce how well the UV passes through the water; a suitable pre-treatment stage must sit ahead of the unit.
Connection and Pressure
The 3 inch flanged inlet and outlet are connected with a mating flange to suit the pipework; line pressure should not exceed the unit’s 6–8 bar working pressure.
Installation and Service Space
Leave clearance to suit the body length so the lamps can be drawn out of the body; prepare a mounting place and a 220 V electrical supply for the panel.
07Maintenance and Use
Notes That Keep It Performing
With regular maintenance the Amalgam UV Water Treatment Unit keeps its performance at high flow.
- Lamp life is 9,000 hours, which in continuous operation corresponds to about 375 days. Even if the lamps continue to light, their UV intensity falls, so they must be renewed when their life is up.
- Keep a regular eye on the fault indicator and operating hours on the digital panel; when the audible fault alarm sounds or a lamp life warning appears, check the lamps.
- If limescale, iron or manganese builds up on the quartz sleeves the UV cannot reach the water; check and clean the sleeves regularly.
- Do not run the lamps while the body is empty of water; amalgam lamps running in air can begin to suffer damage within 6–12 hours.
- Disconnect the unit from the electricity supply and release the pressure in the line while changing lamps or cleaning sleeves.
- Do not neglect maintenance of the pre-treatment stages; turbidity that gets past the filters reduces how well the UV passes through the water and lowers the unit’s performance.
08Frequently Asked Questions
Common Questions
What does the Amalgam UV Water Treatment Unit do?
It passes clear, filtered water through the ultraviolet light of two amalgam lamps; by disrupting the structure of microorganisms in the water, it helps reduce the microbiological load. It is used on lines up to 50 m³ per hour at a 300 J/m² dose.
How does an amalgam lamp differ from a standard UV lamp?
Both are low-pressure mercury vapour lamps and produce UV at 254 nanometres. In an amalgam lamp the mercury is alloyed with a metal such as indium; the lamp runs at a higher temperature and with higher power per unit length. Fewer lamps are therefore needed for the same dose.
What do 300 J/m² and 400 J/m² mean?
Both values are ultraviolet doses, that is, the UV energy reaching a unit area. The Amalgam UV Water Treatment Unit delivers a flow rate of 50 m³ per hour at a 300 J/m² dose and 38 m³ per hour at a 400 J/m² dose. Which dose to work to is decided by the application and the water analysis.
Is it enough on its own?
No. This unit does not remove sediment, chlorine, hardness or dissolved salts. Because turbidity, iron and manganese reduce how well the UV passes through the water, suitable pre-treatment stages must sit ahead of it.
When should the lamps be replaced?
Lamp life is 9,000 hours, and the digital panel gives a warning when that time is up. Even if the lamps continue to light, their UV intensity has fallen, so they should be renewed at that point; the quartz sleeves should be cleaned at the same service.
Does it come with a warranty?
Yes. The Amalgam UV Water Treatment Unit is covered by a 2-year warranty.
To write a review, please log in to your account. If you don't have an account, you can create one on the same page.
Questions & Answers
Questions asked about this product
Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.
No questions have been published for this product yet. You can be the first to ask.
Installation and commissioning
Installation is a service · plumbing is the customer’s responsibilityThe system is delivered ready to install; it only needs to be connected to the inlet and outlet lines. If valve setup is required, we provide free support over a video call. Installation and commissioning fall under our service work and are subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.
Warranty
2 years · manufacturerThis product is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.
Site Survey
Free when the system is bought from usThe site survey is free when the system is purchased from us. A survey fee of ₺2,000 applies if you request the survey and measurement only.
Withdrawal and returns
Distance sales agreementThe right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.
Related products
Freight delivery
New
480 Tonne/Day Industrial Reverse Osmosis System – 20 m³/Hour
≈ 480 Tonnes (24 Hours)
Industrial Reverse Osmosis · 8"
₺2,557,044.84
VAT included
Freight delivery
Freight delivery
Freight delivery
Reviews
There are no reviews yet.