Delivery
Across Türkiye · 1–3 business daysProducts in stock ship free anywhere in Türkiye and arrive within 1–3 business days. Items not in stock are supplied to order — the lead time is confirmed to you when the order is approved.
Industrial Limescale Treatment Unit
₺96,522.60
VAT included · Made to order · Free shipping
Installation is a service · plumbing is the customer’s responsibility
Free Shipping
Across Türkiye
Lead Time
Confirmed when the order is placed
2-Year Warranty
Misuse is not covered.
Order by Phone
0850 304 95 25
- SKU
- WP-SY-006
- Category
- Whole House & Building Inlet Systems, Well Water Treatment, Industrial Packaged Systems, Water Softeners
Which capacity is enough for you? Let us find the unit that suits you best in six questions.
20-30 Apartments · 150 L Resin · Central System
Industrial Limescale Treatment Unit
The Industrial Limescale Treatment Unit is a central water softening system with 150 litres of cationic resin, designed for residential complexes of 20-30 apartments, apartment inlets, mid-sized hotels, hospitals and factories; it removes hardness at source and protects the whole building’s plumbing from scaling.
- Resin
- 150 Litres Cationic
- Scale
- 20-30 Apartments
- Construction
- Central Softening
01Problem & Solution
The Building’s Shared Limescale Problem
Problem
Every Flat Fighting It Separately
Hard water scales up the boiler, the water heater and the white goods in every single flat. The central heating system and the shared pipework wear down too; energy consumption rises and the cost of breakdowns and maintenance with it.
Solution
One Answer at the Building Inlet
With 150 litres of cationic resin, the Industrial Limescale Treatment Unit removes hardness at the building inlet. Every flat and all the shared pipework is protected by a single system.
02Key Features
The Right Capacity for a Mid-Sized Building
The Industrial Limescale Treatment Unit is designed to solve the limescale problem of mid-sized buildings and businesses for good.
150 Litres of Cationic Resin
A resin volume matched to a mid-sized building’s daily consumption gives steady softening.
Suits 20-30 Apartments
At complex and apartment inlets it covers the shared water needs of buildings of 20-30 flats.
Central Protection
Installed at a single point, it protects every flat, every boiler and all the shared pipework at once.
Fully Automatic Regeneration
The unit backwashes itself and renews the resin with brine, so it needs no constant attention.
Energy Savings
Scale-free water improves heating efficiency in boilers and water heaters and lowers energy consumption.
Better Value on the Service Charge
Protecting the whole building with one unit markedly reduces the cost per flat.
Product Video
Take a Closer Look at the Unit
03Technical Specifications
System Details
| Feature | Value | What it does |
|---|---|---|
| Unit Type | Central Water Softening | Where it is installed and how it produces water. An under-counter domestic unit and a commercial one do not run on the same line. |
| Resin Volume | 150 Litres Cationic | The material that holds back limescale. The more of it, the greater the softening capacity. |
| Intended Scale | 20-30 Apartments | |
| Method | Ion Exchange | The physical or chemical principle behind the treatment. |
| Operation | Fully Automatic | How the unit runs. Pumped models keep producing even when mains pressure is low. |
| Regeneration | With Brine | How the resin is regenerated. This is where salt consumption comes from. |
04Applications
Who Is It For?
The Industrial Limescale Treatment Unit is ideal for central limescale protection in mid-sized buildings and businesses.
- Complexes of 20-30 Apartments
- Apartment Inlets
- Mid-Sized Hotels
- Hospitals
- Factories
- Boiler Rooms
- Business Centres
- Hard Water Areas
05How It Works
How Does the Industrial Limescale Treatment Unit Work?
Installed at the Building Inlet
The unit is installed on the building’s main water inlet, so it feeds every flat and all the shared pipework.
Hard Water Enters
Hard water carrying calcium and magnesium enters the vessel holding the 150 litre cationic resin bed.
Ion Exchange
The resin captures the calcium and magnesium ions that cause hardness and releases sodium ions in their place.
Soft Water Distributed
Cleared of hardness, the water is distributed to every flat in the building and to the shared pipework.
Automatic Regeneration
When the resin is exhausted the unit backwashes itself and renews it with brine, and the cycle continues without interruption.
06Making the Right Choice
What Determines the Right Capacity
When choosing the Industrial Limescale Treatment Unit, the number of flats, the water hardness and the flow rate must be assessed correctly.
Flats and Residents
Buildings of 20-30 flats suit this capacity; larger buildings call for an industrial model.
Water Hardness
A chemical analysis of the water should be carried out; the hardness level directly determines how often regeneration occurs.
Peak Flow
The building’s flow at peak hours must suit the unit’s capacity.
Space and Drainage
There must be enough room in the plant room for the vessel, the salt tank and the drain line.
07Maintenance and Use
Notes That Keep It Performing
- The salt level in the brine tank should be checked regularly; with no salt, no regeneration takes place.
- The hardness of the outlet water should be measured periodically; if it rises, the regeneration setting should be reviewed.
- If there is sediment, iron or manganese at the inlet, pre-filtration should be used; fouled resin loses efficiency.
- The valve and drain line should be checked regularly, and installation is best carried out by a technical service engineer.
08Frequently Asked Questions
Common Questions
What does the Industrial Limescale Treatment Unit do?
It removes the calcium and magnesium ions in water by ion exchange. With 150 litres of cationic resin it protects all the plumbing in complexes, apartment blocks, hotels, hospitals and factories of 20-30 flats from scaling.
How many flats is it enough for?
The unit is designed for buildings of 20-30 flats. That range is a general guide; real performance varies with the hardness of the water and the building’s daily consumption.
Does every flat need its own unit?
No. The unit is installed on the building’s main water inlet and feeds every flat from that one point, which makes the cost per flat markedly lower than buying a unit for each one.
Can softened water be drunk?
No. A softener removes hardness but not dissolved salts, and it adds sodium to the water. Softened water is for utility use; drinking water calls for a separate reverse osmosis system.
Is it hard to maintain?
No. The unit is fully automatic and carries out the backwash and regeneration itself. The routine tasks are keeping an eye on the salt level in the brine tank and measuring the hardness of the outlet water periodically.
Only logged in customers who have purchased this product may leave a review.
Questions & Answers
Questions asked about this product
Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.
No questions have been published for this product yet. You can be the first to ask.
Installation and commissioning
Installation is a service · plumbing is the customer’s responsibilityThe system is delivered ready to install; it only needs to be connected to the inlet and outlet lines. If valve setup is required, we provide free support over a video call. Installation and commissioning fall under our service work and are subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.
Warranty
2 years · manufacturerThe system is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture or installation. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.
Withdrawal and returns
Distance sales agreementThe right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.
Related products
Made to order
Made to order
Made to order
Made to order
Twin-Tank Water Softening
15 Tonnes (Mains Water)
Charged with Cationic Resin
5.00 (1)5.00 out of 5, 1 review
₺113,414.06
Reviews
There are no reviews yet.