New Product

FRP Tank 63x86 – Industrial Tank with 6" Flanged Top and Bottom Openings (6386)

₺349,050.80

VAT included · Free shipping in Türkiye

Installation is a service · plumbing is the customer’s responsibility

Free Shipping Across Türkiye
Fast Delivery Across Türkiye · 1–3 business days
2-Year Warranty Misuse is not covered.
Order by Phone 0850 304 95 25
SKU
WP-TK-008
Category
,

FRP · 63″ × 86″ · 6″ Flanged

A Wide Media Bed in a Single Body for Large Plants with the FRP Tank 63×86

The FRP Tank 63×86 is a large industrial pressure tank with a glass-fibre reinforced composite body, 63 inches in diameter and 86 inches tall. Its 6 inch flanged top and bottom openings are suited to connecting large-diameter distributors and valve assemblies; filled with resin, quartz sand or activated carbon, it forms the body of softening and filtration systems at factory, hotel and housing-estate scale.

Size
63" × 86"
Openings
6" Flanged · Top and Bottom
Body
FRP Composite

01Problem & Solution

One Large Body Instead of Many Tanks

Problem

Many Tanks, Many Connections

In factories, hotels and large housing estates the hourly water demand is very high. Meeting that flow by lining up small tanks side by side means more valves, more pipework, more space and more maintenance points. Metal bodies, meanwhile, can rust over time when in contact with the regeneration brine.

Solution

A Composite Body 63 Inches in Diameter

With a diameter of about 1.6 metres, the FRP Tank 63×86 brings a very large bed area together in a single body. The composite construction does not rust; the 6 inch flanged top and bottom openings connect to large-diameter distributors and valve assemblies.

02Key Features

A Filtration Body for Large Plants

The FRP Tank 63×86 provides a very large bed area in a single tank for high-flow industrial softeners and for sand and carbon filters.

63″ × 86″ Size

Its nominal diameter is 63 inches (approximately 1,600 mm) and its nominal height is 86 inches (approximately 2,184 mm); it is also known as 6386.

6 Inch Flanged Top and Bottom Openings

There is a 6 inch flanged opening at both the top and the bottom of the tank; the connection is made with a bolted flange.

Two Types of Installation

It is used both in top-mounted systems, with the valve on top of the tank, and in side-mounted systems, where the valves are piped beside the tank.

Glass-Fibre Reinforced Body

The layer of glass fibre wound over the inner liner gives the tank its pressure resistance.

Corrosion-Free Construction

The composite body does not rust; it is suitable for contact with the brine used in regeneration.

Black Base Skirt

The tank stands upright on a black base skirt that supports its rounded bottom dome.

03Technical Specifications

Tank Specifications

Feature Value
Product Type FRP Pressure Tank (Empty)
Tank Size 63" × 86" (6386)
Nominal Diameter 63" (≈1,600 mm)
Nominal Height 86" (≈2,184 mm)
Openings Top and Bottom
Opening Connection 6" Flanged
Body Construction Glass-Fibre Reinforced Composite
Colour Blue
Base Black Base Skirt
Not Included Valve · Distributors · Media

04Applications

Where Is It Used?

The FRP Tank 63×86 is used as the body in the high-flow softening and filtration systems of large plants.

Industrial Water SofteningSand FiltersActivated Carbon FiltersFactory Process WaterHotels and Holiday ResortsEstates and Housing DevelopmentsWell Water Main LinesReverse Osmosis Pre-Treatment

05How It Works

How Does the FRP Tank 63×86 Work?

The FRP Tank 63×86 does not treat water on its own; it is the pressurised body in which the media inside it and the valve fitted to it do their work. General information on the material that gives the body its strength can be found on the glass fibre page. Although the way it operates varies with the media, the sequence of flow is the same:

  1. The Distributors and Media Go In

    The bottom collector and top distributor are placed in the tank, followed by the resin, sand or activated carbon; freeboard is left at the top for the bed to expand.

  2. The Valve or Valve Assembly Is Connected

    In a top-mounted installation the control valve is fitted to the top opening; in a side-mounted installation the top and bottom openings are piped to the valve assembly.

  3. The Water Passes Through the Media

    Raw water enters the tank at the top and filters down through the media bed; hardness, sediment or chlorine is held back, depending on the type of media.

  4. Treated Water Is Collected at the Bottom

    The water gathered in the collector beneath the bed is delivered to the line through the riser tube or the bottom opening, depending on the type of installation.

  5. Backwash and Regeneration

    At the set interval the valve backwashes the media; in softening, the resin is regenerated with brine and the tank returns to service.

06Making the Right Choice

Is the FRP Tank 63×86 Right for Your System?

When choosing the FRP Tank 63×86, the type of installation, media volume, flow rate and installation site should be assessed together.

Type of Installation

Top-mounted and side-mounted installations use different distributors; the distributor and valve assembly to be used with the tank must be chosen for the same type of installation.

Media Volume

The media volume is calculated at the project stage from the water analysis, the flow rate and the capacity required; the tank is not filled completely.

Flow Rate

The 63 inch diameter provides a very large bed area; the line’s highest instantaneous flow rate determines the tank, distributor and valve diameters together.

Installation Site

The tank is about 1.6 metres in diameter and 2.18 metres tall; door and passage dimensions, ceiling height and the unloading arrangements should be planned in advance.

07Maintenance and Use

Notes That Protect Tank Life

Installed correctly and operated within the limits on its label, the FRP Tank 63×86 gives many years of service.

  • Stand the tank upright on a level, load-bearing floor; because a filled tank is very heavy, decide its final position before filling.
  • Support the body and the base during unloading and moving; do not lift the tank by slinging it from its flanges.
  • Tighten the flange bolts crosswise and evenly; keep the gasket faces clean.
  • Do not leave the tank where there is a risk of frost or in direct sunlight; if a vacuum can form in the line, use a vacuum breaker.
  • Do not exceed the maximum pressure and temperature stated on the label; use a pressure reducer on lines where the pressure fluctuates.

08Frequently Asked Questions

Common Questions

What does the FRP Tank 63×86 do?
It is the body that holds the media under pressure in industrial water softeners and in sand and activated carbon filters. The distributors and the valve or valve assembly are connected to its top and bottom openings; the water is treated as it passes through the media.
What does 63×86 mean?
The first number is the diameter of the tank in inches and the second its height: 63 inches in diameter (approximately 1,600 mm) and 86 inches tall (approximately 2,184 mm). The same size is also written as 6386.
Does the tank come with distributors or a valve?
No. The FRP Tank 63×86 is sold as an empty tank; the valve, the top and bottom distributors and the media are chosen separately.
Is it used in a top-mounted or a side-mounted installation?
Both are possible. In a top-mounted installation the control valve is connected to the top opening; in a side-mounted installation the top and bottom openings are piped to the valve assembly beside the tank. The distributors are chosen to suit the type of installation.
Where should an FRP tank be installed?
It should be installed on a level, load-bearing floor, in a place that does not freeze and is out of direct sunlight. Because the tank is about 1.6 metres in diameter, door and passage dimensions should be checked in advance and its final position decided before filling.
Does the FRP tank come with a warranty?
Units, valves, pumps and tanks carry a 2-year warranty and taps a 1-year warranty. Filters, membranes, resin and salt are consumables and fall outside the warranty.

Reviews

There are no reviews yet.

Be the first to review “FRP Tank 63x86 – Industrial Tank with 6" Flanged Top and Bottom Openings (6386)”

Questions & Answers

Questions asked about this product

Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.

No questions have been published for this product yet. You can be the first to ask.

Ask a question about this product

Your email address will not be published. Questions are reviewed by our technical team and published together with the answer.

Delivery

Across Türkiye · 1–3 business days

Products in stock ship free anywhere in Türkiye and arrive within 1–3 business days. Items not in stock are supplied to order — the lead time is confirmed to you when the order is approved.

Installation

Installation is a service · plumbing is the customer’s responsibility

Fitting the part falls under our service work and is subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.

Warranty

2 years · manufacturer

This product is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.

Withdrawal and returns

Distance sales agreement

The right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.

Cancellation and return terms

How can we help?

Two different requests, two different forms.

The two forms ask different things: if we are building a new system we ask about your water and capacity; if your existing system needs service we ask for its brand and a photo.

Not sure? Call us and let’s work it out together: 0850 304 95 25

₺349,050.80 VAT included
Add to Cart