New Product

FRP Tank 36x72 – Industrial Filter Tank with 4" Top and Bottom Openings (3672)

₺124,661.00

VAT included · Free shipping in Türkiye

Installation is a service · plumbing is the customer’s responsibility

Free Shipping Across Türkiye
Fast Delivery Across Türkiye · 1–3 business days
2-Year Warranty Misuse is not covered.
Order by Phone 0850 304 95 25
SKU
WP-TK-007
Category
,

FRP · 36″ × 72″ · 4″ Threaded

An Industrial Body for High-Flow Lines with the FRP Tank 36×72

The FRP Tank 36×72 is an industrial pressure tank with a glass-fibre reinforced composite body, 36 inches in diameter and 72 inches tall. Thanks to its 4 inch threaded top and bottom openings it is used both in systems with a top-mounted valve and in side-piped systems; filled with resin, quartz sand or activated carbon, it forms the body of high-flow softening and filtration units.

Size
36" × 72"
Openings
4" Threaded · Top and Bottom
Body
FRP Composite

01Problem & Solution

As the Flow Grows, So Does the Body

Problem

Small Tanks Are Not Enough

As the hourly water demand rises in hotels, housing estates, factories and large businesses, small-diameter tanks cannot provide enough bed area; and installing a large number of small tanks in parallel adds to the space, pipework and maintenance burden.

Solution

A Large-Diameter Composite Tank

With its 36 inch diameter the FRP Tank 36×72 offers a large bed area. The composite body does not rust; the top and bottom openings allow the distributor and collector to be connected at both ends and make a side-piped installation possible.

02Key Features

A Body for Industrial Softening and Filtration

The FRP Tank 36×72 provides a large bed area in a single tank for high-flow softeners and for sand and carbon filters.

36″ × 72″ Size

Its nominal diameter is 36 inches (approximately 914 mm) and its nominal height is 72 inches (approximately 1,829 mm); it is also known as 3672.

4 Inch Threaded Top and Bottom Openings

There is a 4 inch threaded opening at both the top and the bottom of the tank.

Two Types of Installation

It is used both in top-mounted systems, with the valve on top of the tank, and in side-mounted systems, where the valves are piped beside the tank.

Glass-Fibre Reinforced Body

The layer of glass fibre wound over the inner liner gives the tank its pressure resistance.

Corrosion-Free Construction

The composite body does not rust; it is suitable for contact with the brine used in regeneration.

Black Base Skirt

The tank stands upright on a black base skirt that supports its rounded bottom dome.

03Technical Specifications

Tank Specifications

Feature Value
Product Type FRP Pressure Tank (Empty)
Tank Size 36" × 72" (3672)
Nominal Diameter 36" (≈914 mm)
Nominal Height 72" (≈1,829 mm)
Openings Top and Bottom
Opening Connection 4" Threaded
Body Construction Glass-Fibre Reinforced Composite
Colour Blue
Base Black Base Skirt
Not Included Valve · Distributors · Media

04Applications

Where Is It Used?

The FRP Tank 36×72 is used as the body of high-flow industrial softening and filtration systems.

Industrial Water SofteningSand FiltersActivated Carbon FiltersHotels and Holiday ResortsEstate and Apartment Complex InletsFactory Process WaterWell Water TreatmentReverse Osmosis Pre-Treatment

05How It Works

How Does the FRP Tank 36×72 Work?

The FRP Tank 36×72 does not treat water on its own; it is the pressurised body in which the media inside it and the valve fitted to it do their work. General information on the material that gives the body its strength can be found on the glass fibre page. Although the way it operates varies with the media, the sequence of flow is the same:

  1. The Distributors and Media Go In

    The bottom collector and top distributor are placed in the tank, followed by the resin, sand or activated carbon; freeboard is left at the top for the bed to expand.

  2. The Valve or Valve Assembly Is Connected

    In a top-mounted installation the control valve is fitted to the top opening; in a side-mounted installation the top and bottom openings are piped to the valve assembly.

  3. The Water Passes Through the Media

    Raw water enters the tank at the top and filters down through the media bed; hardness, sediment or chlorine is held back, depending on the type of media.

  4. Treated Water Is Collected at the Bottom

    The water gathered in the collector beneath the bed is delivered to the line through the riser tube or the bottom opening, depending on the type of installation.

  5. Backwash and Regeneration

    At the set interval the valve backwashes the media; in softening, the resin is regenerated with brine and the tank returns to service.

06Making the Right Choice

Is the FRP Tank 36×72 Right for Your System?

When choosing the FRP Tank 36×72, the type of installation, media volume, flow rate and installation site should be assessed together.

Type of Installation

Top-mounted and side-mounted installations use different distributors; the distributor and valve to be used with the tank must be chosen for the same type of installation.

Media Volume

The media volume is calculated at the project stage from the water analysis, the flow rate and the capacity required; the tank is not filled completely.

Flow Rate

The 36 inch diameter provides a large bed area; the line’s highest instantaneous flow rate determines the choice of tank and valve together.

Installation Site

The tank, about 91 cm in diameter and 1.83 metres tall, must be able to pass through doors and corridors; clearance for connections and maintenance is needed above it and a level, load-bearing floor beneath it.

07Maintenance and Use

Notes That Protect Tank Life

Installed correctly and operated within the limits on its label, the FRP Tank 36×72 gives many years of service.

  • Stand the tank upright on a level, load-bearing floor; because a filled tank is very heavy, decide its final position before filling.
  • Do not drag the tank by its openings; support the body and the base when moving it.
  • Do not leave the tank where there is a risk of frost or in direct sunlight.
  • Use a vacuum breaker on installations where a vacuum can form in the line; a vacuum can damage the inner liner.
  • Do not exceed the maximum pressure and temperature stated on the label; use a pressure reducer on lines where the pressure fluctuates.

08Frequently Asked Questions

Common Questions

What does the FRP Tank 36×72 do?
It is the body that holds the media under pressure in industrial water softeners and in sand and activated carbon filters. The distributors and the valve or valve assembly are connected to its top and bottom openings; the water is treated as it passes through the media.
What does 36×72 mean?
The first number is the diameter of the tank in inches and the second its height: 36 inches in diameter (approximately 914 mm) and 72 inches tall (approximately 1,829 mm). The same size is also written as 3672.
Does the tank come with distributors or a valve?
No. The FRP Tank 36×72 is sold as an empty tank; the valve, the top and bottom distributors and the media are chosen separately.
Is it used in a top-mounted or a side-mounted installation?
Both are possible. In a top-mounted installation the control valve is connected to the top opening; in a side-mounted installation the top and bottom openings are piped to the valve assembly beside the tank. The distributors are chosen to suit the type of installation.
Where should an FRP tank be installed?
It should be installed on a level, load-bearing floor, in a place that does not freeze and is out of direct sunlight. Because a filled tank is very heavy, its final position should be decided before filling, and clearance should be left above it for connections and maintenance.
Does the FRP tank come with a warranty?
Units, valves, pumps and tanks carry a 2-year warranty and taps a 1-year warranty. Filters, membranes, resin and salt are consumables and fall outside the warranty.

Reviews

There are no reviews yet.

Be the first to review “FRP Tank 36x72 – Industrial Filter Tank with 4" Top and Bottom Openings (3672)”

Questions & Answers

Questions asked about this product

Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.

No questions have been published for this product yet. You can be the first to ask.

Ask a question about this product

Your email address will not be published. Questions are reviewed by our technical team and published together with the answer.

Delivery

Across Türkiye · 1–3 business days

Products in stock ship free anywhere in Türkiye and arrive within 1–3 business days. Items not in stock are supplied to order — the lead time is confirmed to you when the order is approved.

Installation

Installation is a service · plumbing is the customer’s responsibility

Fitting the part falls under our service work and is subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.

Warranty

2 years · manufacturer

This product is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.

Withdrawal and returns

Distance sales agreement

The right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.

Cancellation and return terms

How can we help?

Two different requests, two different forms.

The two forms ask different things: if we are building a new system we ask about your water and capacity; if your existing system needs service we ask for its brand and a photo.

Not sure? Call us and let’s work it out together: 0850 304 95 25

₺124,661.00 VAT included
Add to Cart