Delivery
Confirmed when the order is placedThe delivery time is confirmed to you when your order is approved. This product is heavy and bulky, so it is shipped by freight; freight costs within Türkiye are covered by us.
New Product
Amalgam UV Water Treatment Unit 100 m³/Hour – 4 Lamps
₺328,080.15
VAT included · Free freight delivery
This product is heavy and bulky, so it is shipped by freight; freight costs within Türkiye are covered by us.
Ordering from outside Türkiye
Online payment is only available for delivery addresses in Türkiye. For orders from abroad, we prepare a price quote.
- Shipping, customs duties and any taxes are paid by the buyer.
- Payment is made by bank transfer after a proforma invoice.
- Delivery time and shipping method are agreed together in the quote.
Your location:
Free Freight Delivery
Across Türkiye
Lead Time
Confirmed when the order is placed
2-Year Warranty
Misuse is not covered.
Order by Phone
0850 304 95 25
- SKU
- WP-UV-011
- Category
- UV Water Treatment, Industrial Water Treatment
Amalgam · 4 Lamps · 100 m³/Hour
High Flow on the Main Line with the Amalgam UV Water Treatment Unit 100 m³/Hour
The Amalgam UV Water Treatment Unit 100 m³/hour is a high-flow ultraviolet treatment unit with 5 inch flanges, in which four amalgam lamps work together inside a 304 grade stainless steel body. It runs at 100 m³ per hour at a 300 J/m² dose and 75 m³ per hour at a 400 J/m² dose; the four lamps have a combined power of 1,260 watts. It helps reduce the microbiological load without adding chemicals to the water. The digital control panel monitors the lamps with a fault indicator, an electronic hour meter and an audible fault alert, and gives a warning when lamp life is up.
- Flow Rate (300 J/m²)
- 100 m³/hour
- Number of Lamps
- 4 Amalgam
- Total Lamp Power
- 1,260 Watt
01Problem & Solution
As Flow Rises, Exposure Time Shortens
Problem
Standard Lamps Mean Many Lamps
On main lines, the higher the flow, the less time the water spends under the UV light. Delivering the required dose with standard low-pressure lamps takes a large number of lamps; as the lamp count rises the body grows, the panel gets crowded, and lamp changes and the maintenance load increase.
Solution
Four Amalgam Lamps, 100 m³/Hour
With low-pressure high-output amalgam lamps, the Amalgam UV Water Treatment Unit 100 m³/hour produces more ultraviolet light per unit length. It handles a flow of 100 m³ per hour with four lamps; each lamp runs at 315 watts and a single digital panel monitors them all.
02Key Features
High Flow, Few Lamps
The Amalgam UV Water Treatment Unit 100 m³/hour is designed for industrial main lines carrying 75–100 m³ of water per hour.
4 Amalgam Lamps
High-output amalgam lamps produce more UV light than standard low-pressure lamps, so fewer lamps are needed for the same dose. Total power is 1,260 watts.
100 m³/Hour Flow
At a 300 J/m² dose it runs at 100 m³ per hour. In 400 J/m² applications, where a higher dose is required, the flow rate is 75 m³ per hour.
5 Inch Flanged Connection
The inlet and outlet are 5 inch flanged; the unit is connected by flanges to large-diameter main line and manifold pipework.
304 Stainless Steel Body
The body is 304 grade stainless steel; an AISI 316 body is available as an option. Working pressure is 6–8 bar.
Digital Control Panel
It has a fault indicator, an electronic hour meter and an audible fault alert; the panel gives a warning when lamp life is up.
Chemical-Free Treatment
Ultraviolet light adds no chemicals to the water; it is a physical treatment stage that helps reduce the microbiological load of the water.
03Technical Specifications
System Details
| Feature | Value | What it does |
|---|---|---|
| Product Type | Industrial UV with Amalgam Lamps | The product family it belongs to. When buying a spare, the family alone is not enough; the size and model must match too. |
| Lamp Type | Amalgam · High Output | |
| Number of Lamps | 4 | |
| Total Lamp Power | 1,260 Watt | |
| Flow Rate (300 J/m²) | 100 m³/hour | |
| Flow Rate (400 J/m²) | 75 m³/hour | |
| Connection Diameter | 5 Inch Flanged | The pipe connection size. It has to match the diameter in your plumbing. |
| Housing Material | 304 Stainless Steel | The outer body material. Stainless steel means high pressure and a long life. |
| Body Option | AISI 316 (Optional) | |
| Working Pressure | 6 – 8 Bar | |
| Supply Voltage | 220 V · 50 Hz | |
| Lamp Service Life | 9,000 Hours | |
| Control Panel | Digital · Audible Fault Alarm | |
| Panel Size | 50 × 70 cm |
04Applications
Where Is It Used?
The Amalgam UV Water Treatment Unit 100 m³/hour is used on main lines and at large plants where water has to be passed through ultraviolet light at high flow.
Factories & Production PlantsFood & Beverage PlantsWell Water Main LinesMains & Tank OutletsHotels & Holiday ResortsEstate & Housing Development Main LinesProcess Water LinesTreatment Plant Outlets
05How It Works
How Does the Amalgam UV Water Treatment Unit 100 m³/Hour Work?
The Amalgam UV Water Treatment Unit 100 m³/hour passes the water through the ultraviolet light of four amalgam lamps. The US Environmental Protection Agency’s (EPA) ultraviolet technical guidance manual explains that amalgam lamps belong to the low-pressure high-output class and that the dose is the product of UV intensity and time.
The Water Is Filtered First
Sediment, turbidity, colour, iron and manganese weaken the passage of UV light through the water. The water reaches the unit once it has passed through sand, carbon and, where needed, softening stages and has become clear.
It Enters the Body Through the Flanged Inlet
Water enters the 304 stainless body through the 5 inch flanged inlet and flows around the four amalgam lamps in their quartz sleeves on its way to the outlet flange.
The Amalgam Lamps Produce UV Light
The four lamps run at a combined 1,260 watts. The ultraviolet light disrupts the structure of microorganisms in the water and renders them inactive.
The Dose Is Set by the Flow
The dose the water receives is the product of UV intensity and the time it spends in the body. For 300 J/m² the flow should not exceed 100 m³ per hour, and for 400 J/m² it should not exceed 75 m³ per hour.
It Is Monitored from the Panel
As the water goes on down the line, the digital panel monitors lamp status and operating hours; it signals a fault with the indicator and an audible alert, and gives a warning when lamp life is up.
06Making the Right Choice
Is 100 m³/Hour Right for Your Line?
When choosing the Amalgam UV Water Treatment Unit 100 m³/hour model, line flow rate, target dose, water quality and installation conditions should be assessed together.
Line Flow Rate
Peak instantaneous flow should not exceed 100 m³ per hour for a 300 J/m² target, or 75 m³ per hour for a 400 J/m² target; above that, the water does not receive an adequate dose.
Target Dose
The dose the application requires is set at the project stage; the higher the dose, the lower the flow the same unit can handle.
Water Quality
Turbidity, colour, iron, manganese and hardness affect UV transmission and sleeve cleanliness; a water analysis should be carried out before selection.
Installation and Electricity
Service clearance at the ends of the body for lamp changes, wall space for the 50 × 70 cm panel and a 220 V supply should be planned in advance.
07Maintenance and Use
Notes That Keep It Performing
With regular maintenance the Amalgam UV Water Treatment Unit 100 m³/hour keeps its design dose and flow rate.
- Lamp service life is 9,000 hours. Even while a lamp still lights, its UV intensity falls; once this period is up the lamps should be renewed. The panel gives a warning when lamp life is up.
- If limescale, iron or sediment builds up on the quartz sleeves the UV cannot reach the water; the sleeves should be checked and cleaned regularly.
- Keep a regular eye on the fault indicator and audible alert on the panel; when a warning comes up, check the lamps and the panel without delay.
- Maintenance of the pre-treatment stages should not be neglected; cloudy water directly reduces the performance of the ultraviolet stage.
- While changing lamps or cleaning sleeves, disconnect the unit from the electricity supply and depressurise the body.
08Frequently Asked Questions
Common Questions
What does the Amalgam UV Water Treatment Unit 100 m³/hour do?
It passes filtered water through the ultraviolet light of four amalgam lamps, helping to reduce the microbiological load. It adds no chemicals to the water and works on high-flow main lines at 100 m³ per hour at a 300 J/m² dose and 75 m³ per hour at a 400 J/m² dose.
How does an amalgam lamp differ from a standard lamp?
Amalgam lamps belong to the low-pressure high-output class and take their name from the solid metal alloy (amalgam) inside the lamp. They produce more ultraviolet light per unit length than standard low-pressure lamps, so fewer lamps are needed for the same dose. In this unit the power per lamp is 315 watts.
What do 300 J/m² and 400 J/m² mean?
Both values show the ultraviolet dose the water receives; 300 J/m² equals 30 mJ/cm² and 400 J/m² equals 40 mJ/cm². For a higher dose the water must stay under the light longer, which is why the unit’s flow rate drops to 75 m³ per hour at 400 J/m². Which dose to work to is decided at the project stage according to the application.
Is it enough on its own?
No. The Amalgam UV Water Treatment Unit 100 m³/hour model does not remove sediment, chlorine, hardness or dissolved salts; sand and carbon stages, and where needed softening, must sit ahead of it. Ultraviolet light leaves no lasting effect in the water; if the treated water will stand in a tank for a long time, additional measures should be considered separately.
Does the Amalgam UV Water Treatment Unit 100 m³/hour model work during a power cut?
No. The lamps run on a 220 V 50 Hz supply; during a power cut or a strong voltage fluctuation they can go out, and the water passes through without receiving UV light. At plants where outages are frequent, the electrical infrastructure should be assessed at the project stage.
Can the body material be chosen?
Yes. The standard body is 304 grade stainless steel; an AISI 316 stainless body is available as an option. The choice is made at the quotation stage according to the properties of the water and the needs of the plant.
Does it come with a warranty?
Yes. The Amalgam UV Water Treatment Unit 100 m³/hour model is covered by a 2-year warranty.
To write a review, please log in to your account. If you don't have an account, you can create one on the same page.
Questions & Answers
Questions asked about this product
Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.
No questions have been published for this product yet. You can be the first to ask.
Installation and commissioning
Installation is a service · plumbing is the customer’s responsibilityThe system is delivered ready to install; it only needs to be connected to the inlet and outlet lines. If valve setup is required, we provide free support over a video call. Installation and commissioning fall under our service work and are subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.
Warranty
2 years · manufacturerThis product is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.
Site Survey
Free when the system is bought from usThe site survey is free when the system is purchased from us. A survey fee of ₺2,000 applies if you request the survey and measurement only.
Withdrawal and returns
Distance sales agreementThe right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.
Related products
Freight delivery
Freight delivery
New
480 Tonne/Day Industrial Reverse Osmosis System – 20 m³/Hour
≈ 480 Tonnes (24 Hours)
Industrial Reverse Osmosis · 8"
₺2,557,044.84
VAT included
Freight delivery
Freight delivery
Water Point Pure Water System
Engineered to Requirement
Reverse Osmosis + Deionisation
₺107,840.48
VAT included
Reviews
There are no reviews yet.