New Product

Runxin F73 Tandem Water Softener Valve 1"

₺49,864.40

VAT included · Free shipping in Türkiye

Installation is a service · plumbing is the customer’s responsibility

Free Shipping Across Türkiye
Fast Delivery Across Türkiye · 1–3 business days
2-Year Warranty Misuse is not covered.
Order by Phone 0850 304 95 25
SKU
WP-FV-023
Category
,

Single Valve · U1 / U2 · 3 m³/h

Uninterrupted Softening Across Two Tanks with the Runxin F73 Tandem Water Softener Valve

The Runxin F73 Tandem Water Softener Valve is a 1 inch, volumetrically controlled valve that runs two softener tanks (U1 and U2) alternately from a single valve. While one tank is in service supplying soft water, the other goes into regeneration or stands ready. With a service flow rate of 3 m³ per hour, an 8–14 inch tank range and a working pressure of 1.5–6 bar, it suits small and medium-scale lines in continuous use.

Connection
1" Inlet-Outlet
Service Flow Rate
3 m³/h
Tank Diameter
8"–14"

01Problem & Solution

Soft Water That Stops During Regeneration

Problem

The Regeneration Gap in a Single Tank

In a single-tank softener the tank goes out of service while the resin regenerates; during that time hard water reaches the installation or the flow stops. Moving regeneration to the night does not fully remove the risk of hard water at points that draw water all day, such as boilers, laundries, kitchens or production lines.

Solution

Automatic Switchover Between U1 and U2

The Runxin F73 Tandem Water Softener Valve uses the two tanks in turn by switching the tank in service between U1 and U2. When the tank in service reaches the set water volume, the other tank takes over and the exhausted tank is regenerated; the flow of soft water is not interrupted.

02Key Features

Compact Tandem Control

The Runxin F73 Tandem Water Softener Valve manages a two-tank softening system from a single valve and a single display.

Continuous Water Supply

While one tank is being regenerated the other stays in service; Runxin specifies this valve for applications that need a continuous water supply.

Volumetric Control

The volume of water passing through the tank is metered; regeneration starts according to actual consumption, not the number of days.

Down-Flow and Up-Flow

The same valve offers both down-flow and up-flow regeneration; the choice is made from the programme menu.

Multi-Colour LED Display

If the coloured bar on the display is scrolling, the tank is in service; if it is still, the tank is in regeneration.

Manual Regeneration

With the manual button on the front panel, regeneration can be started whenever needed without waiting for the programmed time.

Button Lock

If the buttons are not touched for 1 minute, the panel locks; this prevents the settings from being changed by accident.

03Technical Specifications

Valve Specifications

FeatureValueWhat it does
BrandRunxinThe manufacturer. The valve and membrane brand decides how easily spares can be found.
ModelF73A · 17603The manufacturer’s model code. Spares and service are matched by this code.
Valve TypeSingle Valve · Two Tanks (U1 / U2)How the valve works.
Inlet and Outlet1" Male
Service Flow Rate3 m³/h
Control TypeVolumetric (Flow-Controlled)How the backwash timing is decided. A flow-controlled system saves both water and salt.
Tank Diameter8"–14"
Working Pressure1.5–6 bar (0.15–0.6 MPa)
Water Temperature5–50 °C
RegenerationDown-Flow / Up-FlowHow the resin is regenerated. This is where salt consumption comes from.
Drain Connection1/2" Male
Brine Line Connection3/8" Male
Mounting Base2.5"-8NPSM
Distributor Tube1.05" Outer Diameter
Feed Water Turbidity< 5 FTU
Display TypeMulti-Colour LED

04Applications

Where Is It Used?

The Runxin F73 Tandem Water Softener Valve is used where a service flow rate of 3 m³ per hour is enough and the soft water supply must not be interrupted at any time of day.

Cafés and RestaurantsHotels and GuesthousesLaundriesSmall Boiler RoomsApartment Building InletsWorkshops and Small-Scale ProductionCentral Heating CircuitsDishwashing Lines

05How It Works

How Does the Runxin F73 Tandem Water Softener Valve Work?

  1. Service: U1 On Line

    Hard water is softened as it passes through the resin bed in tank U1 and flows to the installation; tank U2 waits in a regenerated state.

  2. Switchover When the Volume Is Reached

    When the water passing through U1 reaches the set volume, the valve transfers service to U2 and U1 is taken into regeneration.

  3. Backwash

    Water is passed through the resin bed in the reverse direction; the bed is loosened and the accumulated sediment is flushed to the drain.

  4. Brine and Slow Rinse

    Brine drawn from the brine tank passes slowly through the resin and regenerates it; a slow rinse follows.

  5. Brine Tank Refill

    Water is fed to the brine tank for the next regeneration and a fresh brine solution is prepared.

  6. Fast Rinse and Standby

    A fast rinse flushes out the remaining brine; U1 stands ready again, and the same cycle is repeated for U2 when its turn comes.

06Making the Right Choice

Is the Runxin F73 Tandem Water Softener Valve Right for Your System?

When choosing, the flow rate, tank diameter, pressure and temperature, and the condition of the feed water should be assessed together.

Flow Rate

The service flow rate is 3 m³ per hour. If the facility’s peak-hour consumption is above this, larger tandem valves with 1.5 inch connections are considered.

Tank Diameter

The valve is suitable for tanks of 8–14 inch diameter; the tank and resin volume are determined by the water hardness and daily consumption.

Pressure and Temperature

The mains pressure should be within 1.5–6 bar and the water temperature within 5–50 °C. If the pressure exceeds 6 bar, a pressure reducer is fitted ahead of the valve.

Feed Water

The turbidity of the feed water should be below 5 FTU; for water carrying sand and sediment, a pre-filter is added ahead of the valve.

07Maintenance and Use

For a Long Service Life

A few simple checks are enough for the Runxin F73 Tandem Water Softener Valve to operate reliably.

  • Check the salt level in the brine tank regularly; after a regeneration without salt, the tank will not work at full capacity.
  • Watch the coloured bar on the display: a scrolling bar shows the tank is in service, a still bar that it is in regeneration.
  • If “12:12” is flashing on the display after a long power cut, simply re-enter the time of day; the other settings are retained.
  • If the panel is locked, press the up and down buttons together for 5 seconds to unlock it; if no action is taken, the panel locks again after 1 minute.
  • Filters, membranes, resin and salt are consumables; valves, pumps and tanks are durable spare parts. For valves and spare parts, see the Control Valves category.

08Frequently Asked Questions

Common Questions

What does the Runxin F73 Tandem Water Softener Valve do?
It runs two softener tanks alternately with a single valve. While one tank is in service supplying soft water, the other goes into regeneration or waits; this way soft water reaches the installation even during regeneration.
What do U1 and U2 mean?
They indicate the two tanks managed by the Runxin F73 Tandem Water Softener Valve. Runxin states that the tank in service is switched between U1 and U2; when the tank in service reaches the set volume, the other one takes over.
Are the settings lost if the power goes off?
No. According to Runxin, the settings are retained. If the power cut lasts more than 3 days, “12:12” flashes on the clock display and only the time of day needs to be re-entered.
Should down-flow or up-flow be chosen?
Both methods are available on the same valve and are selected from the programme. With up-flow regeneration, backwashing can be done at set intervals rather than at every regeneration; the clearer the feed water, the longer the interval can be.
What should be done if a higher flow rate is needed?
The service flow rate of the Runxin F73 Tandem Water Softener Valve is 3 m³ per hour. For higher flow rates, larger tandem valves with 1.5 inch connections or two-tank industrial systems are considered.
Does the Runxin F73 Tandem Water Softener Valve come with a warranty?
Units, valves, pumps and tanks carry a 2-year warranty and taps a 1-year warranty. Filters, membranes, resin and salt are consumables and fall outside the warranty. Misuse is not covered by the warranty.

Reviews

There are no reviews yet.

Be the first to review “Runxin F73 Tandem Water Softener Valve 1"”

Questions & Answers

Questions asked about this product

Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.

No questions have been published for this product yet. You can be the first to ask.

Ask a question about this product

Your email address will not be published. Questions are reviewed by our technical team and published together with the answer.

Delivery

Across Türkiye · 1–3 business days

Products in stock ship free anywhere in Türkiye and arrive within 1–3 business days. Items not in stock are supplied to order — the lead time is confirmed to you when the order is approved.

Installation

Installation is a service · plumbing is the customer’s responsibility

Fitting the part falls under our service work and is subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.

Warranty

2 years · manufacturer

This product is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.

Withdrawal and returns

Distance sales agreement

The right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.

Cancellation and return terms

How can we help?

Two different requests, two different forms.

The two forms ask different things: if we are building a new system we ask about your water and capacity; if your existing system needs service we ask for its brand and a photo.

Not sure? Call us and let’s work it out together: 0850 304 95 25

₺49,864.40 VAT included
Add to Cart