Delivery
Confirmed when the order is placedThis product is not held in stock; it is supplied to order and the lead time is confirmed to you when the order is approved. Shipping is free anywhere in Türkiye.
Complex Inlet Water Treatment System
₺96,522.60
VAT included · Made to order · Free shipping in Türkiye
Installation is a service · plumbing is the customer’s responsibility
Free Shipping
Across Türkiye
Lead Time
Confirmed when the order is placed
2-Year Warranty
Misuse is not covered.
Order by Phone
0850 304 95 25
- SKU
- WP-BG-006
- Category
- Whole House & Building Inlet Systems, Industrial Packaged Systems, Water Softeners
Which capacity is enough for you? Let us find the unit that suits you best in six questions.
10-20 Apartments · Sand + Softening · Central
Complex Inlet Water Treatment System
The complex inlet water treatment system is an industrial central system designed specifically for apartment and complex inlets serving 10-20 flats; combining an automatic sand unit with a water softener, it treats coarse sediment and hardness to protect the heating system, boiler, taps and white goods inside each flat and extend their life.
- Scale
- 10-20 Apartments
- Construction
- Sand + Softening
- What It Treats
- Sediment & Limescale
01Problem & Solution
Limescale Hits Every Flat Separately
Problem
A Shared Problem, a Scattered Cost
Hard, sediment-laden water wears down the boiler, the heating system, the taps and the white goods in every single flat. Each flat deals with its own breakdowns, and together it adds up to a serious cost for the building.
Solution
Central Treatment at One Point
The complex inlet water treatment system brings an automatic sand unit and a water softener together at the inlet. Coarse sediment and hardness are dealt with before they enter the building, and every flat is protected by one system.
02Key Features
Two Units, Complete Protection
The complex inlet water treatment system is designed to raise the shared water quality of mid-sized apartment blocks and complexes.
Automatic Sand Unit
Capturing coarse sediment, sand, silt and rust clears the water and protects the plumbing.
Water Softener
Cationic resin removes the hardness, protecting boilers, water heaters and plumbing from scaling.
Suits 10-20 Apartments
It offers a capacity matched to the shared water needs of mid-sized apartment and complex inlets.
Protecting the Equipment Inside Each Flat
It markedly extends the life of the heating system, the boiler, the taps and the white goods.
Fully Automatic Operation
The sand unit backwashes itself and the softener regenerates automatically, so the maintenance burden drops to a minimum.
Economical Per Flat
One central system costs far less than buying a unit for every flat.
Product Video
Take a Closer Look at the System
03Technical Specifications
System Details
| Feature | Value | What it does |
|---|---|---|
| System Type | Central, at the Complex Inlet | The main problem the system solves. Pick the wrong type and the water does not improve. |
| Intended Scale | 10-20 Apartments | |
| Stages | Sand + Softening | The order of the stages. It runs from coarse sediment towards fine treatment. |
| What It Treats | Coarse Sediment · Limescale | |
| Operation | Fully Automatic | How the unit runs. Pumped models keep producing even when mains pressure is low. |
| Mounting | The Main Water Inlet | Where it is mounted. The location decides how easy service and filter changes will be. |
04Applications
Who Is It For?
The complex inlet water treatment system is ideal for building managements that want to raise the shared water quality from a single point.
- Complexes of 10-20 Apartments
- Apartment Inlets
- Complex Managements
- Central Heating Systems
- Hard Water Areas
- Newly Built Blocks
- Protecting Boilers & White Goods
- Sediment-Laden Water Problems
05How It Works
How Does the Complex Inlet Water Treatment System Work?
-
Installed at the Complex Inlet
The system is installed on the complex’s main water inlet, so every flat is fed from that one point.
-
Stage 1: The Automatic Sand Unit
The water passes through the sand bed, where coarse sediment, silt and rust are captured and the water cleared.
-
Stage 2: The Water Softener
The cationic resin captures the calcium and magnesium ions that cause hardness, and the limescale is removed.
-
Distribution to the Flats
Cleared of sediment and hardness, the water goes into the complex’s plumbing and out to every flat.
-
Automatic Renewal
The sand unit backwashes itself and the softening resin regenerates with brine, and the cycle continues.
06Making the Right Choice
What Decides the Right System
When choosing the complex inlet water treatment system, the number of flats, the water analysis and the available space must be assessed correctly.
Number of Flats
Buildings of 10-20 flats suit this system; larger blocks call for a higher capacity.
Water Analysis
The hardness and sediment load directly determine the vessel sizes and the resin volume.
Peak Flow
The complex’s flow at peak hours must suit the system’s capacity.
Space and Drainage
There must be enough room in the plant room for the two vessels, the salt tank and the drain line.
07Maintenance and Use
Notes That Keep It Performing
- The salt level in the brine tank should be checked regularly; with no salt, no softening takes place.
- The sand unit’s backwash settings should be checked, and the drain line confirmed clear.
- The hardness of the outlet water should be measured periodically; if it rises, the regeneration setting should be reviewed.
- Installation and commissioning should be carried out by a technical service engineer; getting the two units in the right order matters.
08Frequently Asked Questions
Common Questions
What does the complex inlet water treatment system do?
Installed at the inlet of an apartment block or complex of 10-20 flats, it treats coarse sediment and hardness. With an automatic sand unit and a water softener working together, the heating system, boiler, taps and white goods inside each flat are protected and last longer.
How many flats is it enough for?
The system is designed for apartment blocks and complexes of 10-20 flats. That range is a general guide; real performance varies with the hardness of the water and the building’s daily consumption. Larger buildings should choose a higher-capacity system.
Why do two units work together?
Each type of contamination is dealt with by a different stage. The automatic sand unit captures coarse sediment, silt and rust; the water softener removes hardness. No single unit can do both, which is why they work in combination.
What is the advantage over a unit in every flat?
A central system is installed at one point and protects every flat at once. The cost per flat is markedly lower than buying a unit for each, and maintenance is managed from a single point too.
Is the water it delivers of drinking quality?
This system raises the quality of the utility water by treating coarse sediment and hardness, and it protects the equipment. If drinking water quality is wanted, a reverse osmosis stage must be added to the system.
Only logged in customers who have purchased this product may leave a review.
Questions & Answers
Questions asked about this product
Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.
No questions have been published for this product yet. You can be the first to ask.
Installation and commissioning
Installation is a service · plumbing is the customer’s responsibilityThe system is delivered ready to install; it only needs to be connected to the inlet and outlet lines. If valve setup is required, we provide free support over a video call. Installation and commissioning fall under our service work and are subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.
Warranty
2 years · manufacturerThe system is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture or installation. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.
Withdrawal and returns
Distance sales agreementThe right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.
Related products
Made to order
Made to order
Made to order
Made to order
Reviews
There are no reviews yet.