Delivery
Confirmed when the order is placedThe delivery time is confirmed to you when your order is approved. This product is heavy and bulky, so it is shipped by freight; freight costs within Türkiye are covered by us.
10 Tonne Factory Water Treatment System
₺220,582.80
VAT included · Free freight delivery
This product is heavy and bulky, so it is shipped by freight; freight costs within Türkiye are covered by us.
Ordering from outside Türkiye
Online payment is only available for delivery addresses in Türkiye. For orders from abroad, we prepare a price quote.
- Shipping, customs duties and any taxes are paid by the buyer.
- Payment is made by bank transfer after a proforma invoice.
- Delivery time and shipping method are agreed together in the quote.
Your location:
Free Freight Delivery
Across Türkiye
Lead Time
Confirmed when the order is placed
2-Year Warranty
Misuse is not covered.
Order by Phone
0850 304 95 25
- SKU
- WP-RO-019
- Category
- Industrial Water Treatment, Reverse Osmosis Systems
2 Units · Activated Carbon · 10 Tonne RO
A Protected Membrane and Steady Production with the Factory Water Treatment System
The Factory Water Treatment System is a two-stage industrial installation in which an activated carbon unit with automatic backwash and a reverse osmosis unit with a daily capacity of 10 tonnes run in series. The carbon stage protects the membrane by holding back chlorine and sediment, while reverse osmosis separates up to 99% of dissolved salts and contaminants, producing 500 litres of water an hour.
- Daily Capacity
- 10 Tonnes
- Hourly Capacity
- 500 Litres
- Pre-Treatment
- Activated Carbon
01Problem & Solution
An Unprotected Membrane Wears Out Early
Problem
Chlorine and Sediment Reach the Membrane
Reverse osmosis membranes have a polyamide structure and are sensitive to chlorine. Chlorine in mains water damages the membrane permanently, while coarse sediment and silt block its surface, cutting output and bringing the cost of replacement forward.
Solution
A Layout with Carbon Pre-Treatment
The Factory Water Treatment System places an activated carbon unit ahead of the reverse osmosis stage. Chlorine, odour and coarse sediment are held back before they reach the membrane, so the membrane lasts longer and production efficiency stays steady.
02Key Features
Two Stages, Industrial Construction
The Factory Water Treatment System brings two complementary units together in a single installation.
10 Tonnes a Day
Producing 500 litres an hour, it meets the daily water requirement of a facility consistently.
Activated Carbon Pre-Treatment
By holding back chlorine, odour and coarse sediment, it protects the membrane and raises treatment efficiency.
ULP21 4040 Membranes
The 4040 membranes give high output at low pressure and separate out dissolved contaminants.
Automatic Backwash
The carbon stage washes itself at regular intervals and needs no constant intervention.
A Durable Steel Frame
A powder-coated carbon steel frame gives a solid build and long life in industrial use.
PPRC Pipework
PPRC pipework on the low- and high-pressure lines gives a safe, durable installation.
03Technical Specifications
System Details
| Feature | Value | What it does |
|---|---|---|
| System Type | Carbon + Reverse Osmosis | The main problem the system solves. Pick the wrong type and the water does not improve. |
| Daily Capacity | 10 Tonnes | How much water it can treat in a day. It should be at least 1.5 times your daily use. |
| Hourly Capacity | 500 Litres | How much water passes through per unit of time. A low flow rate drops the pressure when more than one tap is open. |
| Stage 1 | Activated Carbon Unit | The first stage. It holds back coarse sediment and extends the life of the filters behind it. |
| Stage 2 | Reverse Osmosis Unit | The second stage. It takes out chlorine, taste and odour. |
| Membrane | ULP21 4040 | The reverse osmosis membrane. This is the part that decides how pure the water is. |
| Membrane Housing | HFT | |
| Frame | Powder-Coated Carbon Steel | |
| Piping | PPRC | |
| Feed Water TDS | 0 – 2,000 ppm | The inlet water quality the unit can cope with. Above this limit, pre-treatment is needed. |
| Feed Water Pressure | 2 – 5 bar | |
| Treated Water Tank | Supplied by the Customer |
04Applications
Where Is It Used?
The Factory Water Treatment System suits production and service facilities whose water use is in the region of 10 tonnes a day.
- Production Plants
- Workshops
- Textile Applications
- Hotels & Restaurants
- Laboratories
- Process Water Lines
- Chlorinated Mains Water
- Drinking & Utility Water
05How It Works
How Does the Factory Water Treatment System Work?
-
It Enters the Carbon Stage
Raw water is directed from the main line to the activated carbon unit and distributed across the carbon bed.
-
Chlorine and Sediment Are Held Back
The carbon bed protects the membrane by adsorbing chlorine, odour, organic matter and coarse sediment.
-
High-Pressure Pump
The water leaving pre-treatment is delivered onto the surface of the 4040 membranes by the high-pressure pump.
-
Separation at the Membrane
Only water molecules pass through the membrane; dissolved salts and fine contaminants are held back.
-
The Permeate Goes to the Tank
The treated water, produced at 500 litres an hour, is collected in the customer’s own tank, and the concentrate is discharged to drain.
06Making the Right Choice
Is 10 Tonnes Right for Your Site?
When choosing the Factory Water Treatment System, the daily requirement, the tank volume and the raw water analysis should be assessed.
Daily Water Requirement
It is for sites in the 10 tonne a day range; a higher requirement calls for the larger-capacity models.
Tank Volume
The treated water tank is supplied by the customer; its volume should be planned around the output of 500 litres an hour.
Raw Water Analysis
The TDS, hardness, iron and silica figures directly determine the output and the pre-treatment design.
Hardness and Installation
Where hardness is high, softening should be added; the placement and drainage of the two units should be planned in advance.
07Maintenance and Use
Notes That Keep It Performing
The Factory Water Treatment System runs steadily when each stage gets its own maintenance.
- Activated carbon becomes saturated over time; renewing it, generally once a year, maintains treatment performance.
- RO membranes are replaced every 1.5-2 years depending on conditions; if pre-treatment is neglected, this interval shortens.
- The pump pressure and membrane performance should be monitored, and a membrane clean carried out when output falls.
- The treated water tank should be kept hygienic, and the feed water figures monitored to make sure they stay within limits.
08Frequently Asked Questions
Common Questions
What does the Factory Water Treatment System do?
It combines activated carbon pre-treatment with a reverse osmosis unit. The carbon stage protects the membrane by holding back chlorine, odour and sediment, while reverse osmosis separates up to 99% of dissolved salts and contaminants and produces 500 litres of quality water an hour, 10 tonnes a day.
Is the treated water tank included?
No. The treated water tank is not included with the system and is supplied by the customer. The tank volume should be planned around the site’s consumption profile and the production flow of 500 litres an hour.
Why is carbon pre-treatment needed?
Reverse osmosis membranes have a polyamide structure and are sensitive to chlorine. By holding back chlorine, the carbon stage protects the membrane from permanent damage; because it also holds back coarse sediment, it stops the membrane surface from blocking early.
Does it remove limescale and hardness?
Activated carbon does not reduce hardness. Reverse osmosis separates out dissolved substances, hardness included, but with high-hardness water, adding softening as a third stage is recommended to protect the membrane.
What are the feed water conditions?
The feed water should be within 0-2,000 ppm TDS, 2-5 bar pressure and pH 6-8. These figures show that the layout is designed for mains and brackish water applications; it is not suitable for seawater.
To write a review, please log in to your account. If you don't have an account, you can create one on the same page.
Questions & Answers
Questions asked about this product
Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.
No questions have been published for this product yet. You can be the first to ask.
Installation and commissioning
Installation is a service · plumbing is the customer’s responsibilityThe system is delivered ready to install; it only needs to be connected to the inlet and outlet lines. If valve setup is required, we provide free support over a video call. Installation and commissioning fall under our service work and are subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.
Warranty
2 years · manufacturerThis product is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.
Site Survey
Free when the system is bought from usThe site survey is free when the system is purchased from us. A survey fee of ₺2,000 applies if you request the survey and measurement only.
Withdrawal and returns
Distance sales agreementThe right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.
Related products
Freight delivery
Industrial Deionised Pure Water Unit, 250 L/h
5 Tonnes
Mid-Capacity Industrial
₺220,582.80
VAT included
Freight delivery
Twin-Tank Water Softening
15 Tonnes (Mains Water)
Charged with Cationic Resin
5.00 out of 5, 1 review
₺115,193.24
VAT included
Freight delivery
Freight delivery
Reviews
There are no reviews yet.