Delivery
Confirmed when the order is placedThis product is not held in stock; it is supplied to order and the lead time is confirmed to you when the order is approved. Shipping is free anywhere in Türkiye.
Face-Piped Softening System
₺579,135.60
VAT included · Made to order · Free shipping
Free Shipping
Across Türkiye
Lead Time
Confirmed when the order is placed
2-Year Warranty
Misuse is not covered.
Order by Phone
0850 304 95 25
- SKU
- WP-SY-009
- Category
- Water Softeners, Whole House & Building Inlet Systems, Industrial Water Treatment, Well Water Treatment
Which capacity is enough for you? Let us find the unit that suits you best in six questions.
Industrial · Face-Piped Softening
High-Capacity Limescale Treatment with the Face-Piped Softening System
The Face-Piped Softening System is a high-capacity industrial water softening system that removes the calcium and magnesium (hardness) in water by ion exchange with cationic resin. Its fibreglass media tank and face pipework running outside the tank give durability and easy maintenance.
- Media
- Resin 500 L
- Tank
- Fibreglass (FRP)
- Function
- Hardness / Limescale Treatment
01Problem & Solution
Hard Water Wears Equipment Down
Problem
Limescale Build-Up and Lost Efficiency
Water of high hardness causes limescale to build up in boilers, heat exchangers, pipes and machinery. That build-up reduces heat transfer, raises energy consumption and shortens equipment life.
Solution
Ion Exchange with Resin
The Face-Piped Softening System removes hardness by holding the calcium and magnesium in the water on cationic resin and giving sodium in return. With automatic regeneration it provides uninterrupted soft water at high capacity.
02Key Features
High Capacity, Automatic, Durable
The Face-Piped Softening System is built with a durable, service-friendly structure to match the high water demand of a business.
The Advantage of Face Piping
The PVC-U pipes run outside the tank; valves and gate valves are easy to reach, so maintenance takes less time.
500 L Cationic Resin
The high resin volume gives high-capacity, uninterrupted hardness treatment.
Fibreglass (FRP) Tank
The corrosion-resistant fibreglass media tank works safely across different pressure ranges.
Automatic Operation
Automatic operation and backwashing keep user intervention to a minimum and raise operating efficiency.
Electrically Actuated Valves
Cast butterfly valves manage regeneration and the direction of flow automatically and safely.
Equipment Protection
By removing hardness it protects boilers, heat exchangers and machinery against limescale build-up.
03Technical Specifications
System Details
| Feature | Value | What it does |
|---|---|---|
| Media | Cationic Resin 500 L | The treatment media inside the vessel. It is renewed periodically. |
| Support Media | Quartz Sand 125 kg | |
| Tank Material | Fibreglass (FRP) – Filter 3072 | |
| Control | Automatic + Backwash | How the unit is managed. Automatic control needs no daily attention. |
| Valves | Electrically Actuated Butterfly | |
| Max Pressure | 6 bar | |
| Weight | 700 kg | Product weight. For wall mounting, the supporting surface is chosen accordingly. |
| Dimensions | 675 × 675 × 2150 cm | The outer dimensions of the unit. The cabinet or plant room has to be wider than this. |
04Applications
Where Is It Used?
The Face-Piped Softening System is used in industrial plants that need high-capacity limescale treatment.
- Boiler Rooms
- Factories & Production Plants
- Hotels & Hospitals
- Cooling Towers
- RO Pre-Treatment
- Laundries
- Housing Estates & Large Buildings
- Food & Textile Manufacturing
05How It Works
How Does the Face-Piped Softening System Work?
Water Enters the Resin Tank
Hard water passes through the face pipework and is directed onto the cationic resin bed inside the fibreglass tank.
Ion Exchange Takes Place
The resin holds the calcium and magnesium that make the water hard and softens it by giving sodium in return.
Soft Water Out
Softened water, with the hardness removed, is delivered to the plant’s service or process line.
The Resin Becomes Saturated
Over time the resin fills with calcium and magnesium and its softening capacity falls; regeneration is needed.
Automatic Regeneration with Salt
The system renews the resin automatically with a salt solution and returns to service after backwashing.
06Making the Right Choice
What Decides the Right System
When choosing the Face-Piped Softening System, the water hardness, flow and use must be assessed correctly.
Water Hardness
The degree of hardness in the water determines the resin volume needed and the frequency of regeneration.
Water Flow Rate
The hourly and daily water demand directly affects the tank size and the capacity of the system.
Pre-Treatment Requirement
On turbid or sediment-laden water, pre-filtration such as a sand filter before the softener is recommended.
How Critical Is Continuity
Where soft water is needed 24/7 without interruption, twin-tank (tandem) solutions can be considered.
07Maintenance and Use
Notes That Keep It Performing
- The salt level should be checked regularly and topped up when it runs low; when the salt runs out regeneration cannot take place and softening stops.
- Face piping makes the valves easy to reach; valves and seals should be checked periodically.
- If the resin loses efficiency over the years it should be renewed; the hardness of the outlet water should be tested periodically.
- The Face-Piped Softening System removes hardness only; separate stages are needed for suspended solids, turbidity and dissolved salts.
08Frequently Asked Questions
Common Questions
What does the Face-Piped Softening System do?
It removes the calcium and magnesium (hardness) in water by ion exchange with cationic resin. That prevents limescale building up in boilers, heat exchangers, pipes and machinery, protecting the equipment and providing soft water at high capacity.
How does it differ from a sand filter system?
A softening system removes hardness (limescale) with resin; a sand filter holds suspended solids and turbidity mechanically. The two are usually installed in series: the sand filter holds the particles first, then softening removes the limescale.
How does regeneration work?
When the resin fills with calcium and magnesium, the system renews it automatically with a salt (sodium chloride) solution and returns to service after backwashing. That is why keeping an eye on the salt level matters.
What advantage does “face-piped” give?
Because the pipes and valves run outside the tank, along its face, the equipment is easy to reach. That shortens maintenance times and allows quick action in the event of a fault.
Does it make the water drinkable?
It removes hardness but does not treat drinking water on its own; it does not remove suspended solids, dissolved salts or microorganisms. For drinkable water it is used together with sand filter, carbon and reverse osmosis stages.
Only logged in customers who have purchased this product may leave a review.
Questions & Answers
Questions asked about this product
Questions on compatibility, capacity and installation are answered by our technical team. The answers stay public — so the next person with the same question can see them too.
No questions have been published for this product yet. You can be the first to ask.
Installation and commissioning
Installation is a service · plumbing is the customer’s responsibilityThe system is delivered ready to install; it only needs to be connected to the inlet and outlet lines. If valve setup is required, we provide free support over a video call. Installation and commissioning fall under our service work and are subject to a service fee. Plumbing labour and any pipes, valves and fittings are not included in the price; these items are the customer’s responsibility.
Warranty
2 years · manufacturerThe system is covered by a 2-year manufacturer warranty. During the warranty period, labour and parts are free for faults arising from manufacture or installation. Consumables such as filters, membranes and resin are outside warranty cover — they are replaced when their service life ends; they do not fail.
Site Survey
Free when the system is bought from usThe site survey is free when the system is purchased from us. A survey fee of ₺2,000 applies if you request the survey and measurement only.
Withdrawal and returns
Distance sales agreementThe right of withdrawal and the return terms are set out in detail in the distance sales agreement. Systems that have been installed and commissioned, and made-to-order products, are outside its scope.
Related products
Made to order
Made to order
Made to order
Made to order
Reviews
There are no reviews yet.